Calibrate Flow Rate – DAkkS Calibration Starting at 0.48 ml/min
Flow Calibration
Our calibration range extends from 0.48 to 100 ml/min. The lower flow range, in particular, is technically challenging and represents a special focus of our calibration laboratory.
Depending on your requirements, we perform the calibration as either a DAkkS calibration or a factory calibration.
Flow calibration range: 0.48 to 100 ml/min

Flow Calibration for Low Flow Rates
HeMaTech focuses on low flow rates between 0.48 and 100 ml/min. This means the company specifically targets low volume flows. Low flow rates, in particular, place high demands on measurement, reference standards, and calibration procedures.
Have low flow rates calibrated by an accredited laboratory
Accredited calibration is performed in accordance with DIN EN ISO/IEC 17025. Measurement values are determined under defined conditions and documented along with the associated measurement uncertainty.
This is particularly relevant for companies that require accredited and traceably documented calibration for their measuring equipment.
HeMaTech thus places a special emphasis on low flow rates.
Calibrating Flow Sensors and Flow Meters
Depending on the technical design and measurement range, the following are examples of instruments that may be considered:
Not sure if your device falls within our calibration scope? Send us the manufacturer, model, and measurement range. We’ll check in advance whether it can be calibrated.
Flow Calibration Procedure
Flow Calibration for Sensor Manufacturers
If a manufacturer does not have its own appropriately accredited calibration laboratory for the required measurement range, HeMaTech can perform the calibration as an external laboratory service—provided that the measuring equipment and measurement range fall within the scope of calibration services offered.
This is beneficial for both individual pieces of measuring equipment and recurring calibration orders.
Flow and Leak Testing
The calibration laboratory for pressure and flow builds on the company’s expertise in industrial leak testing.
The connection is direct: leak rates are flow rates.
Flow measurements therefore also play an important role in leak testing technology.
However, the calibration laboratory extends beyond this area of application.
It is available not only for HeMaTech test equipment or traditional leak testing applications,
but also for suitable external flow measurement devices.
Calibration Certificate
In the case of a DAkkS calibration, the results are documented in a corresponding calibration certificate.
This includes the measured values and the associated measurement uncertainty.
In the case of a factory calibration, the documentation is provided in a factory calibration certificate.
This allows the results to be recorded in a traceable manner within existing test equipment monitoring and quality assurance processes.


How often should the flow rate be calibrated?
Among other factors, the following are crucial:
Low flow rates ranging from 0.48 to 100 ml/min
HeMaTech covers the range from: 0.48 ml/min to 100 ml/min
Precise measurements and appropriate calibration methods are crucial, especially for low flow rates.
For customers, this means above all that even very low flow rates within the specified range can be calibrated with accreditation.
Request a calibration from HeMaTech now
HeMaTech Prüftechnik GmbH & Co. KG
Siemensstr. 7
D-71409 Schwaikheim
Frequently Asked Questions About Flow Calibration
In what range can HeMaTech calibrate flow rates?
HeMaTech's flow calibration range extends from 0.48 to 100 ml/min. The focus is therefore on low flow rates.
Can HeMaTech perform DAkkS calibration of flow meters?
Yes. HeMaTech operates a DAkkS-accredited calibration laboratory for pressure and flow.
Can flow sensors from other manufacturers also be calibrated?
Yes, in principle, external measuring instruments and sensors may also be considered. The key factor is whether their technical specifications fall within the calibration range.
Why is calibrating low flow rates challenging?
As flow rates decrease, the demands placed on reference measurement technology, calibration procedures, and the control of measurement uncertainty increase. Therefore, the calibration of small volumetric flow rates requires appropriately suited procedures and reference standards.
What is the difference between DAkkS calibration and factory calibration?
A DAkkS calibration is performed as an accredited calibration within the scope of accreditation. A factory calibration is not accredited and may be used for internal testing equipment and quality requirements, provided that an accredited calibration is not required.
How often should a flow meter be calibrated?
The appropriate calibration interval depends on the measuring instrument, its use, previous results, and the requirements of the respective test equipment monitoring program. Therefore, the interval should be adapted to the specific application.
What information does HeMaTech need for a calibration request?
It is helpful to provide the manufacturer, device type, measurement range, desired calibration method, and calibration points. If there are multiple devices, please also specify the number of units.
Can flow rates greater than 100 ml/min also be calibrated?
The calibration range offered here ranges from 0.48 to 100 ml/min. For measuring instruments outside this range, please contact us directly.
Calibrate the flow rate from 0.48 to 100 ml/min
With a calibration range of 0.48 to 100 ml/min, this service is aimed at operators of industrial measurement technology as well as manufacturers of flow sensors and measuring instruments who require an external calibration option.
We will check the technical specifications to determine whether your measuring instrument falls within the calibration range.

