LA200 Quick Connector
- General
- Operation
- Data
The LA200 quick-connect adapter was specifically designed for pressure and vacuum testing of components with internal threads,
such as fittings, valves, pipes, boilers, tanks, heat exchangers, etc. Simply screw the adapter into the thread by hand until the O-ring seal contacts the test specimen. The LA200 seals without a wrench, sealant, or tape. The NBR seals meet most industrial requirements.
The LA200 is available as an adapter with a media inlet, with or without a swivel joint, and as a sealing plug.
Deployment
Quick-connect adapter for pressure and vacuum testing on components with internal threads.
Features
- Wide range of pipe diameters and thread types
- The seal does not need to be adjusted
- Available with a swivel joint for easier installation with a hose
- Extended version for tight installation spaces
- Also available in a high-pressure version
Screw the plug into the thread until it is tight;
Gently tighten it with your fingers so that the O-rings are properly compressed.
The LA200 quick-connect adapter is connected, and the test pressure can now be applied.
After use, release the test pressure and then unscrew the fitting.
| Technical Specifications: | |
| Operating pressure: | Connection B: Vacuum to a maximum of 345 bar |
| Leak: | 10⁻³mbar·l/s (10⁻⁴Pa·m³/s) |
| Temperature range: | 5°C – +80°C |
| Media: | Oil-free air or other gases (please specify when ordering) |
| Material: | Stainless steel |
| Gaskets: | NBR; other versions available upon request |
Dimensions
Sealing Adapter
Adapter with media inlet
Adapter with media inlet and swivel joint
| Housing-
Size |
B | ⌀D
[mm] |
L1
[mm] |
L2
[mm] |
A/F
[mm] |
L4
[mm] |
| 01 | G1/8″ | 20,5 | 31,0 | 8,5 | 45,3 | 17,0 |
| 1 | G1/8″ | 20,5 | 33,0 | 9,0 | 47,3 | 17,0 |
| 2 | G1/4″ | 25,0 | 36,0 | 10,7 | 52,0 | 19,0 |
| 3 | G3/8″ | 30,0 | 39,5 | 11,0 | 57,3 | 24,0 |
| 4 | G1/2″ | 35,0 | 47,5 | 14,5 | 70,7 | 30,0 |
| 5 | G3/4″ | 43,0 | 50,5 | 15,6 | 76,0 | 36,0 |
| 6 | G1″ | 50,0 | 60,0 | 18,0 | * | * |
| 7 | * | 60,0 | 55,0 | 19,2 | 84,3 | 50,0 |
| 8 | * | 69,35 | 62,0 | 19,2 | 94,4 | 60,0 |
| 9 | * | 82,0 | 70,0 | 21,0 | 102,7 | 75,0 |
| * upon request | ||||||
Do you need 3D data for a specific product?
Please enter your email address here